/[svn]/branches/ircd-hybrid-20121027/etc/example.conf
ViewVC logotype

Contents of /branches/ircd-hybrid-20121027/etc/example.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1587 - (show annotations)
Sat Oct 27 20:46:16 2012 UTC (7 years, 9 months ago) by michael
File size: 36535 byte(s)
- Moving directories

1 /* doc/example.conf - ircd-hybrid-7 Example configuration file
2 * Copyright (C) 2000-2011 Hybrid Development Team
3 *
4 * Written by ejb, wcampbel, db, leeh and others
5 * Other example configurations can be found in the source dir under
6 * etc/.
7 *
8 * $Id$
9 */
10
11 /* IMPORTANT NOTES:
12 *
13 * auth {} blocks MUST be specified in order of precedence. The first one
14 * that matches a user will be used. So place spoofs first, then specials,
15 * then general access.
16 *
17 * Shell style (#), C++ style (//) and C style comments are supported.
18 *
19 * Files may be included by either:
20 * .include "filename"
21 * .include <filename>
22 *
23 * Times/durations are written as:
24 * 12 hours 30 minutes 1 second
25 *
26 * Valid units of time:
27 * month, week, day, hour, minute, second
28 *
29 * Valid units of size:
30 * megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
31 *
32 * Sizes and times may be singular or plural.
33 */
34
35 /* EFNET NOTE:
36 *
37 * This config file is NOT suitable for EFNet. EFNet admins should use
38 * example.efnet.conf
39 */
40
41 /*
42 * serverinfo {}: contains information about the server. (OLD M:)
43 */
44 serverinfo {
45 /*
46 * name: the name of this server. This cannot be changed at runtime.
47 */
48 name = "hades.arpa";
49
50 /*
51 * sid: a server's unique ID. This is three characters long and must
52 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
53 * a digit, followed by 2 alpha-numerical letters.
54 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
55 */
56 sid = "_CHANGE_ME_";
57
58 /*
59 * description: the description of the server. '[' and ']' may not
60 * be used here for compatibility with older servers.
61 */
62 description = "hybrid-7 test server";
63
64 /*
65 * network info: the name and description of the network this server
66 * is on. Shown in the 005 reply and used with serverhiding.
67 */
68 network_name = "MyNet";
69 network_desc = "This is My Network";
70
71 /*
72 * hub: allow this server to act as a hub and have multiple servers
73 * connected to it.
74 */
75 hub = no;
76
77 /*
78 * vhost: the IP to bind to when we connect outward to ipv4 servers.
79 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
80 */
81 #vhost = "192.169.0.1";
82
83 /*
84 * vhost6: the IP to bind to when we connect outward to ipv6 servers.
85 * This should be an ipv6 IP only, or "*" for INADDR_ANY.
86 */
87 #vhost6 = "3ffe:80e8:546::2";
88
89 /* max_clients: the maximum number of clients allowed to connect */
90 max_clients = 512;
91
92 /*
93 * rsa_private_key_file: the path to the file containing our
94 * rsa key for cryptlink.
95 *
96 * Example command to store a 2048 bit RSA keypair in
97 * rsa.key, and the public key in rsa.pub:
98 *
99 * openssl genrsa -out rsa.key 2048
100 * openssl rsa -in rsa.key -pubout -out rsa.pub
101 * chown <ircd-user>.<ircd.group> rsa.key rsa.pub
102 * chmod 0600 rsa.key
103 * chmod 0644 rsa.pub
104 */
105 #rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
106
107 /*
108 * ssl_certificate_file: the path to the file containing our
109 * ssl certificate for encrypted client connection.
110 *
111 * This assumes your private RSA key is stored in rsa.key. You
112 * MUST have an RSA key in order to generate the certificate
113 *
114 * openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
115 *
116 * See http://www.openssl.org/docs/HOWTO/certificates.txt
117 *
118 * Please use the following values when generating the cert
119 *
120 * Organization Name: Network Name
121 * Organization Unit Name: changme.someirc.net
122 * Common Name: irc.someirc.net
123 * E-mail: you@domain.com
124 */
125 #ssl_certificate_file = "/usr/local/ircd/etc/cert.pem";
126
127 /*
128 * ssl_server_protocol:
129 * SSL/TLS protocols we provide for incoming secure connections.
130 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
131 * SSLv2 is not suppported. This cannot be changed at runtime.
132 */
133 #ssl_server_protocol = sslv3, tlsv1;
134 };
135
136 /*
137 * admin {}: contains admin information about the server. (OLD A:)
138 */
139 admin {
140 name = "Smurf target";
141 description = "Main Server Administrator";
142 email = "<syn@packets.r.us>";
143 };
144
145 /*
146 * log {}: contains information about logfiles.
147 */
148 log {
149 /* Do you want to enable logging to ircd.log? */
150 use_logging = yes;
151
152 /*
153 * logfiles: the logfiles to use for user connects, /oper uses,
154 * and failed /oper. These files must exist for logging to be used.
155 */
156 fname_userlog = "logs/userlog";
157 fname_operlog = "logs/operlog";
158 fname_killlog = "logs/kill";
159 fname_klinelog = "logs/kline";
160 fname_glinelog = "logs/gline";
161
162 /*
163 * log_level: the amount of detail to log in ircd.log. The
164 * higher, the more information is logged. May be changed
165 * once the server is running via /quote SET LOG. Either:
166 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
167 */
168 log_level = L_INFO;
169 };
170
171 /*
172 * class {}: contains information about classes for users (OLD Y:)
173 */
174 class {
175 /* name: the name of the class. classes are text now */
176 name = "users";
177
178 /*
179 * ping_time: how often a client must reply to a PING from the
180 * server before they are dropped.
181 */
182 ping_time = 90 seconds;
183
184 /*
185 * number_per_ip: how many local users are allowed to connect
186 * from one IP (optional)
187 */
188 number_per_ip = 2;
189
190 /*
191 * max_local: how many local users are allowed to connect
192 * from one ident@host (optional)
193 */
194 max_local = 2;
195
196 /*
197 * max_global: network-wide limit of users per ident@host (optional)
198 */
199 max_global = 10;
200
201 /*
202 * max_number: the maximum number of users allowed in this class (optional)
203 */
204 max_number = 100;
205
206 /*
207 * the following lines are optional and allow you to define
208 * how many users can connect from one /NN subnet
209 */
210 cidr_bitlen_ipv4 = 24;
211 cidr_bitlen_ipv6 = 120;
212 number_per_cidr = 16;
213
214 /*
215 * sendq: the amount of data allowed in a clients queue before
216 * they are dropped.
217 */
218 sendq = 100 kbytes;
219 };
220
221 class {
222 name = "opers";
223 ping_time = 90 seconds;
224 number_per_ip = 10;
225 max_number = 100;
226 sendq = 100kbytes;
227 };
228
229 class {
230 name = "server";
231 ping_time = 90 seconds;
232
233 /*
234 * ping_warning: how fast a server must reply to a PING before
235 * a warning to opers is generated.
236 */
237 ping_warning = 15 seconds;
238
239 /*
240 * connectfreq: only used in server classes. Specifies the delay
241 * between autoconnecting to servers.
242 */
243 connectfreq = 5 minutes;
244
245 /* max number: the amount of servers to autoconnect to */
246 max_number = 1;
247
248 /* sendq: servers need a higher sendq as they send more data */
249 sendq = 2 megabytes;
250 };
251
252 /*
253 * listen {}: contains information about the ports ircd listens on (OLD P:)
254 */
255 listen {
256 /*
257 * port: the specific port to listen on. If no host is specified
258 * before, it will listen on all available IPs.
259 *
260 * Ports are separated via a comma, a range may be specified using ".."
261 */
262
263 /* port: listen on all available IPs, ports 6665 to 6669 */
264 port = 6665 .. 6669;
265
266 /*
267 * Listen on 192.168.0.1/6697 with ssl enabled and hidden from STATS P
268 * unless you are an administrator.
269 *
270 * NOTE: The "flags" directive has to come before "port". Always!
271 *
272 * Currently available flags are:
273 *
274 * ssl - Port is for SSL client connections only
275 * server - Only server connections are permitted
276 * hidden - Port is hidden from /stats P
277 */
278 flags = hidden, ssl;
279 host = "192.168.0.1";
280 port = 6697;
281
282 /*
283 * host: set a specific IP/host the ports after the line will listen
284 * on. This may be ipv4 or ipv6.
285 */
286 host = "1.2.3.4";
287 port = 7000, 7001;
288
289 host = "3ffe:1234:a:b:c::d";
290 port = 7002;
291 };
292
293 /*
294 * auth {}: allow users to connect to the ircd (OLD I:)
295 */
296 auth {
297 /*
298 * user: the user@host allowed to connect. Multiple IPv4/IPv6 user
299 * lines are permitted per auth block.
300 */
301 user = "*@172.16.0.0/12";
302 user = "*test@123D:B567:*";
303
304 /* password: an optional password that is required to use this block */
305 password = "letmein";
306
307 /*
308 * encrypted: controls whether the auth password above has been
309 * encrypted.
310 */
311 encrypted = yes;
312
313 /*
314 * spoof: fake the users host to this. This is free-form,
315 * just do everyone a favor and don't abuse it. ('=' prefix on /stats I)
316 */
317 spoof = "I.still.hate.packets";
318
319 /* class: the class the user is placed in */
320 class = "opers";
321
322 /*
323 * need_password: don't allow users who haven't supplied the correct
324 * password to connect using another auth{} block
325 * ('&' prefix on /stats I if disabled)
326 * need_ident: require the user to have identd to connect ('+' prefix on /stats I)
327 * spoof_notice: enable spoofing notification to admins
328 * exceed_limit: allow a user to exceed class limits ('>' prefix on /stats I)
329 * kline_exempt: exempt this user from k/glines ('^' prefix on /stats I)
330 * gline_exempt: exempt this user from glines ('_' prefix on /stats I)
331 * resv_exempt: exempt this user from resvs ('$' prefix on /stats I)
332 * no_tilde: remove ~ from a user with no ident ('-' prefix on /stats I)
333 * can_flood: allow this user to exceed flood limits ('|' prefix on /stats I)
334 * can_idle: exempt this user from idle restrictions ('<' prefix on /stats I)
335 */
336 flags = need_password, spoof_notice, exceed_limit, kline_exempt,
337 gline_exempt, resv_exempt, no_tilde, can_flood, can_idle;
338 };
339
340 auth {
341 /*
342 * redirect: the server and port to redirect a user to. A user does
343 * not have to obey the redirection, the ircd just suggests an alternative
344 * server for them.
345 */
346 redirserv = "this.is.not.a.real.server";
347 redirport = 6667;
348
349 user = "*.server";
350
351 /* class: a class is required even though it is not used */
352 class = "users";
353 };
354
355 auth {
356 user = "*@*";
357 class = "users";
358 flags = need_ident;
359 };
360
361 /*
362 * operator {}: defines ircd operators. (OLD O:)
363 *
364 * ircd-hybrid no longer supports local operators, privileges are
365 * controlled via flags.
366 */
367 operator {
368 /* name: the name of the oper */
369 /* NOTE: operator "opername"{} is also supported */
370 name = "god";
371
372 /*
373 * user: the user@host required for this operator. CIDR is not
374 * supported. Multiple user="" lines are supported.
375 */
376 user = "*god@*";
377 user = "*@127.0.0.1";
378
379 /*
380 * password: the password required to oper. By default this will
381 * need to be encrypted by using the provided mkpasswd tool.
382 * Several password hash algorithms are available depending
383 * on your system's crypt() implementation. For example, a modern
384 * glibc already has support for SHA-256/512, and MD5 encryption
385 * algorithms.
386 */
387 password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";
388
389 /*
390 * encrypted: controls whether the oper password above has been
391 * encrypted.
392 */
393 encrypted = yes;
394
395 /*
396 * rsa_public_key_file: the public key for this oper when using Challenge.
397 * A password should not be defined when this is used, see
398 * doc/challenge.txt for more information.
399 */
400 # rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";
401
402 /* class: the class the oper joins when they successfully /oper */
403 class = "opers";
404
405 /*
406 * umodes: default usermodes opers get when they /oper. If defined,
407 * it will override oper_umodes settings in general {}.
408 * Available usermodes:
409 *
410 * +b - bots - See bot and drone flooding notices
411 * +c - cconn - Client connection/quit notices
412 * +C - cconn_full - Client connection/quit notices full
413 * +D - deaf - Don't receive channel messages
414 * +d - debug - See debugging notices
415 * +f - full - See I: line full notices
416 * +G - softcallerid - Server Side Ignore for users not on your channels
417 * +g - callerid - Server Side Ignore (for privmsgs etc)
418 * +i - invisible - Not shown in NAMES or WHO unless you share a
419 * a channel
420 * +k - skill - See server generated KILL messages
421 * +l - locops - See LOCOPS messages
422 * +n - nchange - See client nick changes
423 * +r - rej - See rejected client notices
424 * +s - servnotice - See general server notices
425 * +u - unauth - See unauthorized client notices
426 * +w - wallop - See server generated WALLOPS
427 * +x - external - See remote server connection and split notices
428 * +y - spy - See LINKS, STATS, TRACE notices etc.
429 * +z - operwall - See oper generated WALLOPS
430 */
431 # umodes = locops, servnotice, operwall, wallop;
432
433 /*
434 * privileges: controls the activities and commands an oper is
435 * allowed to do on the server. All options default to no.
436 * Available options:
437 *
438 * global_kill: allows remote users to be /KILL'd (OLD 'O' flag)
439 * remote: allows remote SQUIT and CONNECT (OLD 'R' flag)
440 * remoteban: allows remote KLINE/UNKLINE
441 * kline: allows KILL, KLINE and DLINE (OLD 'K' flag)
442 * unkline: allows UNKLINE and UNDLINE (OLD 'U' flag)
443 * gline: allows GLINE (OLD 'G' flag)
444 * xline: allows XLINE (OLD 'X' flag)
445 * operwall: allows OPERWALL
446 * nick_changes: allows oper to see nickchanges (OLD 'N' flag)
447 * via usermode +n
448 * rehash: allows oper to REHASH config (OLD 'H' flag)
449 * die: allows DIE and RESTART (OLD 'D' flag)
450 * admin: gives admin privileges. admins
451 * may (un)load modules and see the
452 * real IPs of servers.
453 * hidden_admin: same as 'admin', but noone can recognize you as
454 * being an admin
455 * hidden_oper: not shown in /stats p (except for other operators)
456 *
457 * A flag can be negated with ~ i.e.
458 * flags = ~remote;
459 */
460 flags = global_kill, remote, kline, unkline, xline,
461 die, rehash, nick_changes, admin, operwall;
462 };
463
464 /*
465 * connect {}: controls servers we connect to (OLD C:, N:, H:, L:)
466 */
467 connect {
468 /* name: the name of the server */
469 name = "irc.uplink.com";
470
471 /*
472 * host: the host or IP to connect to. If a hostname is used it
473 * must match the reverse dns of the server.
474 */
475 host = "192.168.0.1";
476
477 /*
478 * vhost: the IP to bind to when we connect outward to servers.
479 * serverinfo::vhost and serverinfo::vhost6 will be overridden
480 * by this directive.
481 */
482 vhost = "192.168.0.2";
483
484 /*
485 * passwords: the passwords we send (OLD C:) and accept (OLD N:).
486 * The remote server will have these passwords reversed.
487 */
488 send_password = "password";
489 accept_password = "anotherpassword";
490
491 /*
492 * encrypted: controls whether the accept_password above has been
493 * encrypted.
494 */
495 encrypted = no;
496
497 /* port: the port to connect to this server on */
498 port = 6666;
499
500 /*
501 * hub_mask: the mask of servers that this server may hub. Multiple
502 * entries are permitted
503 */
504 hub_mask = "*";
505
506 /*
507 * leaf_mask: the mask of servers this server may not hub. Multiple
508 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
509 */
510 # leaf_mask = "*.uk";
511
512 /* class: the class this server is in */
513 class = "server";
514
515 /*
516 * autoconn: controls whether we autoconnect to this server or not,
517 * dependent on class limits. By default, this is disabled.
518 * compressed: controls whether traffic is compressed via ziplinks.
519 * By default, this is disabled
520 * cryptlink: enable full encryption for all data passing between our
521 * server and this link and rsa authentication.
522 * burst_away: This will send the /away string that users have set
523 * on the server burst. Note this can be a lot of data
524 * and slow down your server burst.
525 * topicburst: Send topics to this server during channel burst. Works
526 * only if the server we are connecting to is capable
527 * of TBURST/TB.
528 */
529 # flags = autoconn, compressed, cryptlink, burst_away, topicburst;
530 };
531
532 connect {
533 name = "encrypted.auth.example";
534 host = "some.host.somewhere";
535 port = 6667;
536
537 flags = cryptlink;
538
539 /*
540 * rsa_public_key_file: the path to the public keyfile of the server.
541 * Used instead of passwords.
542 */
543 rsa_public_key_file = "etc/remote.server.keyfile";
544
545 /*
546 * cipher preference: set the preferred cipher for this link
547 *
548 * Available ciphers are:
549 * BF/168 BF/128 CAST/128 IDEA/128 RC5.16/128
550 * RC5.12/128 RC5.8/128 3DES/168 DES/56
551 *
552 * NOTE: Some ciphers may not be supported by your OpenSSL.
553 * Check the output from 'configure' for available ciphers.
554 *
555 * NOTE2: To help you decide what cipher to use, tools/encspeed
556 * will show you approximately how fast each cipher is.
557 * However, blowfish is fast and secure, and is probably
558 * a good default for most situations.
559 *
560 * NOTE3: Default if none is set is BF/128
561 *
562 * The cipher *MUST* be the same in both directions. If you
563 * set a cipher preference, your uplink must set the same cipher,
564 * else it will not link.
565 */
566 # cipher_preference = "BF/168";
567 };
568
569 /*
570 * NOTE: Don't add an extra 'name=' entry if you use
571 * the connect "name"{} feature
572 */
573 connect "ipv6.some.server" {
574 host = "3ffd:dead:beef::1";
575 send_password = "password";
576 accept_password = "password";
577 port = 6666;
578
579 /*
580 * aftype: controls whether the connection uses "ipv4" or "ipv6".
581 * Default is ipv4.
582 */
583 aftype = ipv6;
584 class = "server";
585 };
586
587 /*
588 * cluster {}: servers that share klines/unkline/xline/unxline/resv/unresv/locops
589 * automatically (OLD hyb6 SLAVE_SERVERS)
590 */
591 cluster {
592 /*
593 * name: the server to share with, this can take wildcards
594 *
595 * NOTE: only local actions will be clustered, meaning if
596 * the server receives a shared kline/unkline/etc, it
597 * will not be propagated to clustered servers.
598 *
599 * Remote servers are not necessarily required to accept
600 * clustered lines, they need a shared{} for *THIS* server
601 * in order to accept them.
602 */
603 name = "*.arpa";
604
605 /*
606 * type: list of what to share, options are as follows:
607 * kline - share klines
608 * tkline - share temporary klines
609 * unkline - share unklines
610 * xline - share xlines
611 * txline - share temporary xlines
612 * unxline - share unxlines
613 * resv - share resvs
614 * tresv - share temporary resvs
615 * unresv - share unresvs
616 * locops - share locops
617 * all - share all of the above (default)
618 */
619 type = kline, unkline, locops, xline, resv;
620 };
621
622 /*
623 * shared {}: users that are allowed to remote kline (OLD U:)
624 *
625 * NOTE: This can be effectively used for remote klines.
626 * Please note that there is no password authentication
627 * for users setting remote klines. You must also be
628 * /oper'd in order to issue a remote kline.
629 */
630 shared {
631 /*
632 * name: the server the user must be on to set klines. If this is not
633 * specified, the user will be allowed to kline from all servers.
634 */
635 name = "irc2.some.server";
636
637 /*
638 * user: the user@host mask that is allowed to set klines. If this is
639 * not specified, all users on the server above will be allowed to set
640 * a remote kline.
641 */
642 user = "oper@my.host.is.spoofed";
643
644 /*
645 * type: list of what to share, options are as follows:
646 * kline - allow oper/server to kline
647 * tkline - allow temporary klines
648 * unkline - allow oper/server to unkline
649 * xline - allow oper/server to xline
650 * txline - allow temporary xlines
651 * unxline - allow oper/server to unxline
652 * resv - allow oper/server to resv
653 * tresv - allow temporary resvs
654 * unresv - allow oper/server to unresv
655 * locops - allow oper/server to locops - only used for servers that cluster
656 * all - allow oper/server to do all of the above (default)
657 */
658 type = kline, unkline, resv;
659 };
660
661 /*
662 * kill {}: users that are not allowed to connect (OLD K:)
663 * Oper issued klines will be added to the specified kline config
664 */
665 kill {
666 user = "bad@*.hacked.edu";
667 reason = "Obviously hacked account";
668 };
669
670 kill {
671 user = "^O[[:alpha:]]?[[:digit:]]+(x\.o|\.xo)$@^[[:alnum:]]{4}\.evilnet.tld$";
672
673 /*
674 * NOTE: You have to set type=regex; when using a regular expression
675 * based user entry
676 */
677 type = regex;
678 };
679
680 /*
681 * deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
682 * Oper issued dlines will be added to the specified dline config
683 */
684 deny {
685 ip = "10.0.1.0/24";
686 reason = "Reconnecting vhosted bots";
687 };
688
689 /*
690 * exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:)
691 */
692 exempt {
693 ip = "192.168.0.0/16";
694 };
695
696 /*
697 * resv {}: nicks and channels users may not use/join (OLD Q:)
698 */
699 resv {
700 /* reason: the reason for the proceeding resv's */
701 reason = "There are no services on this network";
702
703 /* resv: the nicks and channels users may not join/use */
704 nick = "nickserv";
705 nick = "chanserv";
706 channel = "#services";
707
708 /* resv: wildcard masks are also supported in nicks only */
709 reason = "Clone bots";
710 nick = "clone*";
711 };
712
713 /*
714 * gecos {}: The X: replacement, used for banning users based on
715 * their "realname".
716 */
717 gecos {
718 name = "*sex*";
719 reason = "Possible spambot";
720 };
721
722 gecos {
723 name = "sub7server";
724 reason = "Trojan drone";
725 };
726
727 gecos {
728 name = "*http*";
729 reason = "Spambot";
730 };
731
732 gecos {
733 name = "^\[J[0o]hn Do[3e]\]-[0-9]{2,5}$";
734
735 /*
736 * NOTE: You have to set type=regex; when using a regular expression
737 * based name entry
738 */
739 type = regex;
740 };
741
742 /*
743 * channel {}: The channel block contains options pertaining to channels
744 */
745 channel {
746 /*
747 * disable_fake_channels: this option, if set to 'yes', will
748 * disallow clients to create or join channels that have one
749 * of the following ASCII characters in their name:
750 *
751 * 2 | bold
752 * 3 | mirc color
753 * 15 | plain text
754 * 22 | reverse
755 * 31 | underline
756 * 160 | non-breaking space
757 */
758 disable_fake_channels = yes;
759
760 /*
761 * restrict_channels: reverse channel RESVs logic, only reserved
762 * channels are allowed
763 */
764 restrict_channels = no;
765
766 /*
767 * disable_local_channels: prevent users from joining &channels.
768 */
769 disable_local_channels = no;
770
771 /*
772 * use_invex: Enable/disable channel mode +I, a n!u@h list of masks
773 * that can join a +i channel without an invite.
774 */
775 use_invex = yes;
776
777 /*
778 * use_except: Enable/disable channel mode +e, a n!u@h list of masks
779 * that can join a channel through a ban (+b).
780 */
781 use_except = yes;
782
783 /*
784 * use_knock: Allows users to request an invite to a channel that
785 * is locked somehow (+ikl). If the channel is +p or you are banned
786 * the knock will not be sent.
787 */
788 use_knock = yes;
789
790 /*
791 * knock_delay: The amount of time a user must wait between issuing
792 * the knock command.
793 */
794 knock_delay = 5 minutes;
795
796 /*
797 * knock_delay_channel: How often a knock to any specific channel
798 * is permitted, regardless of the user sending the knock.
799 */
800 knock_delay_channel = 1 minute;
801
802 /*
803 * burst_topicwho: enable sending of who set topic on topicburst
804 * default is yes
805 */
806 burst_topicwho = yes;
807
808 /*
809 * max_chans_per_user: The maximum number of channels a user can
810 * join/be on.
811 */
812 max_chans_per_user = 25;
813
814 /* quiet_on_ban: stop banned people talking in channels. */
815 quiet_on_ban = yes;
816
817 /* max_bans: maximum number of +b/e/I modes in a channel */
818 max_bans = 25;
819
820 /*
821 * how many joins in how many seconds constitute a flood, use 0 to
822 * disable. +b opers will be notified (changeable via /set)
823 */
824 join_flood_count = 16;
825 join_flood_time = 8 seconds;
826
827 /*
828 * splitcode: The ircd will now check splitmode every few seconds.
829 *
830 * Either split users or split servers can activate splitmode, but
831 * both conditions must be met for the ircd to deactivate splitmode.
832 *
833 * You may force splitmode to be permanent by /quote set splitmode on
834 */
835
836 /*
837 * default_split_user_count: when the usercount is lower than this level,
838 * consider ourselves split. This must be set for automatic splitmode.
839 */
840 default_split_user_count = 0;
841
842 /*
843 * default_split_server_count: when the servercount is lower than this,
844 * consider ourselves split. This must be set for automatic splitmode.
845 */
846 default_split_server_count = 0;
847
848 /* no_create_on_split: disallow users creating channels on split. */
849 no_create_on_split = yes;
850
851 /* no_join_on_split: disallow users joining channels at all on a split. */
852 no_join_on_split = no;
853 };
854
855 /*
856 * serverhide {}: The serverhide block contains the options regarding
857 * serverhiding
858 */
859 serverhide {
860 /*
861 * flatten_links: this option will show all servers in /links appear
862 * that they are linked to this current server
863 */
864 flatten_links = no;
865
866 /*
867 * links_delay: how often to update the links file when it is
868 * flattened.
869 */
870 links_delay = 5 minutes;
871
872 /*
873 * hidden: hide this server from a /links output on servers that
874 * support it. This allows hub servers to be hidden etc.
875 */
876 hidden = no;
877
878 /*
879 * disable_hidden: prevent servers hiding themselves from a
880 * /links output.
881 */
882 disable_hidden = no;
883
884 /*
885 * hide_servers: hide remote servernames everywhere and instead use
886 * hidden_name and network_desc.
887 */
888 hide_servers = no;
889
890 /*
891 * Use this as the servername users see if hide_servers = yes.
892 */
893 hidden_name = "*.hidden.com";
894
895 /*
896 * hide_server_ips: If this is disabled, opers will be unable to see
897 * servers ips and will be shown a masked ip, admins will be shown the
898 * real ip.
899 *
900 * If this is enabled, nobody can see a servers ip. *This is a kludge*,
901 * it has the side effect of hiding the ips everywhere, including
902 * logfiles.
903 *
904 * We recommend you leave this disabled, and just take care with who you
905 * give admin=yes; to.
906 */
907 hide_server_ips = no;
908 };
909
910 /*
911 * general {}: The general block contains many of the options that were once
912 * compiled in options in config.h. The general block is read at start time.
913 */
914 general {
915 /* max_watch: maximum WATCH entries a client can have. */
916 max_watch = 60;
917
918 /*
919 * gline_min_cidr: the minimum required length of a CIDR bitmask
920 * for IPv4 based glines
921 */
922 gline_min_cidr = 16;
923
924 /*
925 * gline_min_cidr6: the minimum required length of a CIDR bitmask
926 * for IPv6 based glines
927 */
928 gline_min_cidr6 = 48;
929
930 /*
931 * Whether to automatically set mode +i on connecting users.
932 */
933 invisible_on_connect = yes;
934
935 /*
936 * If you don't explicitly specify burst_away in your connect blocks, then
937 * they will default to the burst_away value below.
938 */
939 burst_away = no;
940
941 /*
942 * Show "actually using host <ip>" on /whois when possible.
943 */
944 use_whois_actually = yes;
945
946 /*
947 * Max time from the nickname change that still causes KILL
948 * automatically to switch for the current nick of that user.
949 */
950 kill_chase_time_limit = 90 seconds;
951
952 /*
953 * If hide_spoof_ips is disabled, opers will be allowed to see the real IP of spoofed
954 * users in /trace etc. If this is defined they will be shown a masked IP.
955 */
956 hide_spoof_ips = yes;
957
958 /*
959 * Ignore bogus timestamps from other servers. Yes, this will desync
960 * the network, but it will allow chanops to resync with a valid non TS 0
961 *
962 * This should be enabled network wide, or not at all.
963 */
964 ignore_bogus_ts = no;
965
966 /*
967 * disable_auth: completely disable ident lookups; if you enable this,
968 * be careful of what you set need_ident to in your auth {} blocks
969 */
970 disable_auth = no;
971
972 /* disable_remote_commands: disable users doing commands on remote servers */
973 disable_remote_commands = no;
974
975 /*
976 * tkline_expire_notices: enables or disables temporary kline/xline
977 * expire notices.
978 */
979 tkline_expire_notices = no;
980
981 /*
982 * default_floodcount: the default value of floodcount that is configurable
983 * via /quote set floodcount. This is the amount of lines a user
984 * may send to any other user/channel in one second.
985 */
986 default_floodcount = 10;
987
988 /*
989 * failed_oper_notice: send a notice to all opers on the server when
990 * someone tries to OPER and uses the wrong password, host or ident.
991 */
992 failed_oper_notice = yes;
993
994 /*
995 * dots_in_ident: the amount of '.' characters permitted in an ident
996 * reply before the user is rejected.
997 */
998 dots_in_ident = 2;
999
1000 /*
1001 * min_nonwildcard: the minimum non wildcard characters in k/d/g lines
1002 * placed via the server. klines hand placed are exempt from limits.
1003 * wildcard chars: '.' ':' '*' '?' '@' '!' '#'
1004 */
1005 min_nonwildcard = 4;
1006
1007 /*
1008 * min_nonwildcard_simple: the minimum non wildcard characters in
1009 * gecos bans. wildcard chars: '*' '?' '#'
1010 */
1011 min_nonwildcard_simple = 3;
1012
1013 /* max_accept: maximum allowed /accept's for +g usermode */
1014 max_accept = 20;
1015
1016 /* anti_nick_flood: enable the nickflood control code */
1017 anti_nick_flood = yes;
1018
1019 /* nick flood: the nick changes allowed in the specified period */
1020 max_nick_time = 20 seconds;
1021 max_nick_changes = 5;
1022
1023 /*
1024 * anti_spam_exit_message_time: the minimum time a user must be connected
1025 * before custom quit messages are allowed.
1026 */
1027 anti_spam_exit_message_time = 5 minutes;
1028
1029 /*
1030 * ts delta: the time delta allowed between server clocks before
1031 * a warning is given, or before the link is dropped. all servers
1032 * should run ntpdate/rdate to keep clocks in sync
1033 */
1034 ts_warn_delta = 30 seconds;
1035 ts_max_delta = 5 minutes;
1036
1037 /*
1038 * kline_with_reason: show the user the reason why they are k/d/glined
1039 * on exit. May give away who set k/dline when set via tcm.
1040 */
1041 kline_with_reason = yes;
1042
1043 /*
1044 * kline_reason: show this message to users on channel
1045 * instead of the oper reason.
1046 */
1047 kline_reason = "Connection closed";
1048
1049 /*
1050 * reject_hold_time: wait this amount of time before disconnecting
1051 * a rejected client. Use 0 to disable.
1052 */
1053 reject_hold_time = 0;
1054
1055 /*
1056 * warn_no_nline: warn opers about servers that try to connect but
1057 * we don't have a connect {} block for. Twits with misconfigured
1058 * servers can get really annoying with this enabled.
1059 */
1060 warn_no_nline = yes;
1061
1062 /*
1063 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
1064 * operators and administrators. Doing so is a good idea in case
1065 * there are any exempted (exempt{}) server IPs you don't want to
1066 * see leaked.
1067 */
1068 stats_e_disabled = no;
1069
1070 /* stats_o_oper only: make stats o (opers) oper only */
1071 stats_o_oper_only = yes;
1072
1073 /* stats_P_oper_only: make stats P (ports) oper only */
1074 stats_P_oper_only = yes;
1075
1076 /*
1077 * stats i oper only: make stats i (auth {}) oper only. set to:
1078 * yes: show users no auth blocks, made oper only.
1079 * masked: show users first matching auth block
1080 * no: show users all auth blocks.
1081 */
1082 stats_i_oper_only = yes;
1083
1084 /*
1085 * stats_k_oper_only: make stats k/K (klines) oper only. set to:
1086 * yes: show users no auth blocks, made oper only
1087 * masked: show users first matching auth block
1088 * no: show users all auth blocks.
1089 */
1090 stats_k_oper_only = yes;
1091
1092 /*
1093 * caller_id_wait: time between notifying a +g user that somebody
1094 * is messaging them.
1095 */
1096 caller_id_wait = 1 minute;
1097
1098 /*
1099 * opers_bypass_callerid: allows operators to bypass +g and message
1100 * anyone who has it set (useful if you use services).
1101 */
1102 opers_bypass_callerid = no;
1103
1104 /*
1105 * pace_wait_simple: time between use of less intensive commands
1106 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
1107 */
1108 pace_wait_simple = 1 second;
1109
1110 /*
1111 * pace_wait: time between more intensive commands
1112 * (INFO, LINKS, LIST, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
1113 */
1114 pace_wait = 10 seconds;
1115
1116 /*
1117 * short_motd: send clients a notice telling them to read the motd
1118 * instead of forcing a motd to clients who may simply ignore it.
1119 */
1120 short_motd = no;
1121
1122 /*
1123 * ping_cookie: require clients to respond exactly to a ping command,
1124 * can help block certain types of drones and FTP PASV mode spoofing.
1125 */
1126 ping_cookie = no;
1127
1128 /* no_oper_flood: increase flood limits for opers. */
1129 no_oper_flood = yes;
1130
1131 /*
1132 * true_no_oper_flood: completely eliminate flood limits for opers
1133 * and for clients with can_flood = yes in their auth {} blocks
1134 */
1135 true_no_oper_flood = yes;
1136
1137 /* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels */
1138 oper_pass_resv = yes;
1139
1140 /*
1141 * idletime: the maximum amount of time a user may idle before
1142 * they are disconnected
1143 */
1144 idletime = 0;
1145
1146 /* REMOVE ME. The following line checks you've been reading. */
1147 havent_read_conf = 1;
1148
1149 /*
1150 * max_targets: the maximum amount of targets in a single
1151 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
1152 */
1153 max_targets = 4;
1154
1155 /*
1156 * client_flood: maximum amount of data in a clients queue before
1157 * they are dropped for flooding.
1158 */
1159 client_flood = 2560 bytes;
1160
1161 /*
1162 * message_locale: the default message locale
1163 * Use "standard" for the compiled in defaults.
1164 * To install the translated messages, go into messages/ in the
1165 * source directory and run `make install'.
1166 */
1167 message_locale = "standard";
1168
1169 /*
1170 * usermodes configurable: a list of usermodes for the options below
1171 *
1172 * +b - bots - See bot and drone flooding notices
1173 * +c - cconn - Client connection/quit notices
1174 * +C - cconn_full - Client connection/quit notices full
1175 * +D - deaf - Don't receive channel messages
1176 * +d - debug - See debugging notices
1177 * +f - full - See I: line full notices
1178 * +G - softcallerid - Server Side Ignore for users not on your channels
1179 * +g - callerid - Server Side Ignore (for privmsgs etc)
1180 * +i - invisible - Not shown in NAMES or WHO unless you share a
1181 * a channel
1182 * +k - skill - See server generated KILL messages
1183 * +l - locops - See LOCOPS messages
1184 * +n - nchange - See client nick changes
1185 * +r - rej - See rejected client notices
1186 * +s - servnotice - See general server notices
1187 * +u - unauth - See unauthorized client notices
1188 * +w - wallop - See server generated WALLOPS
1189 * +x - external - See remote server connection and split notices
1190 * +y - spy - See LINKS, STATS, TRACE notices etc.
1191 * +z - operwall - See oper generated WALLOPS
1192 */
1193
1194 /* oper_only_umodes: usermodes only opers may set */
1195 oper_only_umodes = bots, cconn, cconn_full, debug, full, skill,
1196 nchange, rej, spy, external, operwall,
1197 locops, unauth;
1198
1199 /* oper_umodes: default usermodes opers get when they /oper */
1200 oper_umodes = bots, locops, servnotice, operwall, wallop;
1201
1202 /*
1203 * servlink_path: path to 'servlink' program used by ircd to handle
1204 * encrypted/compressed server <-> server links.
1205 *
1206 * only define if servlink is not in same directory as ircd itself.
1207 */
1208 #servlink_path = "/usr/local/ircd/bin/servlink";
1209
1210 /*
1211 * default_cipher_preference: default cipher to use for cryptlink when none is
1212 * specified in connect block.
1213 */
1214 #default_cipher_preference = "BF/168";
1215
1216 /*
1217 * use_egd: if your system does not have *random devices yet you
1218 * want to use OpenSSL and encrypted links, enable this. Beware -
1219 * EGD is *very* CPU intensive when gathering data for its pool
1220 */
1221 # use_egd = yes;
1222
1223 /*
1224 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
1225 * which automatically finds the path.
1226 */
1227 # egdpool_path = "/var/run/egd-pool";
1228
1229
1230 /*
1231 * compression_level: level of compression for compressed links between
1232 * servers.
1233 *
1234 * values are between: 1 (least compression, fastest)
1235 * and: 9 (most compression, slowest).
1236 */
1237 # compression_level = 6;
1238
1239 /*
1240 * throttle_time: the minimum amount of time between connections from
1241 * the same ip. exempt {} blocks are excluded from this throttling.
1242 * Offers protection against flooders who reconnect quickly.
1243 * Set to 0 to disable.
1244 */
1245 throttle_time = 10;
1246 };
1247
1248 glines {
1249 /* enable: enable glines, network wide temp klines */
1250 enable = yes;
1251
1252 /*
1253 * duration: the amount of time a gline will remain on your
1254 * server before expiring
1255 */
1256 duration = 1 day;
1257
1258 /*
1259 * logging: which types of rules you want to log when triggered
1260 * (choose reject or block)
1261 */
1262 logging = reject, block;
1263
1264 /*
1265 * NOTE: gline ACLs can cause a desync of glines throughout the
1266 * network, meaning some servers may have a gline triggered, and
1267 * others may not. Also, you only need insert rules for glines
1268 * that you want to block and/or reject. If you want to accept and
1269 * propagate the gline, do NOT put a rule for it.
1270 */
1271
1272 /* user@host for rule to apply to */
1273 user = "god@I.still.hate.packets";
1274 /* server for rule to apply to */
1275 name = "hades.arpa";
1276
1277 /*
1278 * action: action to take when a matching gline is found. options are:
1279 * reject - do not apply the gline locally
1280 * block - do not propagate the gline
1281 */
1282 action = reject, block;
1283
1284 user = "god@*";
1285 name = "*";
1286 action = block;
1287 };
1288
1289 modules {
1290 /*
1291 * path: other paths to search for modules specified below
1292 * and in /modload.
1293 */
1294 path = "/usr/local/ircd/lib/ircd-hybrid/modules";
1295 path = "/usr/local/ircd/lib/ircd-hybrid/modules/autoload";
1296
1297 /* module: the name of a module to load on startup/rehash */
1298 #module = "some_module.la";
1299 };

Properties

Name Value
svn:eol-style native
svn:keywords Id Revision

svnadmin@ircd-hybrid.org
ViewVC Help
Powered by ViewVC 1.1.28